- Rigs Of Rods Tow Trucks Controls
- Rigs Of Rods Keyboard Controls
- Rigs Of Rods Controls
- Rigs Of Rods Bus Controls
- Rigs Of Rods Control List
- Dec 30, 2010 Hello, I just started playing ROR.It is my first time and I would like to know the controls. It is a very realistic monster truck game. Can somebody please please please send me a list of controls on driving a monster truck.
- This MAY work for 4.8.I HAVE NOT TRIED IT SO DON'T QUOTE ME!Thanks!SubscribeLikeComment If it workedLet me know what i can improve.
A video tutorial on how to install a keymap for rigs of rods(PS3, XBOX 360 controllers).
Introduction: Basics in Flying an Aircraft in Rigs of Rods
I discovered Rigs of Rods at the year 2011 and I loved it. I always fly a 767 AA Airliner there. I kept on experimenting how to fly it smoothly since I think there is no autopilot. Anyway just tell me if there is autopilot for RoR and the key for it so I could put a step for it. I discovered that low speeds make it fly smoother. Now I will teach you the basics of it from take-off to landing. I landed in the middle of nowhere since I am still practicing how to land. NOTE: I DONT HAVE A FORUM ACCOUNT AND RIGS OF RODS IS FREE. THIS INSTRUCTABLE IS NOT INTENDED FOR TRAINING OR REFERENCE FOR FLYING IN REAL LIFE. IF YOU WANT TO LEARN TO FLY A REAL AIRCRAFT, GO TO A FLIGHT SCHOOL.
Step 1: You Will Need:
1. Rigs of Rods
2. Flat map, Simple Terrain or Grenoble.(or any map with airport)
3. Any Aircraft(I recommend Antonov 12 for beginners)
Step 2: Controls(Only Those I Know)
NOTE: SOME MIGHT BE INCORRECT
CTRL+Home - Turn on/off engines
Page Up/Page Down - Throttles
Arrow Down Key - Go up
Arrow Up Key - Go down
Z - Left rudder
X - Right rudder
Arrow Left/Right Key - Turn
1 - Flaps up
2 - Flaps down
F3 - Gear Up
F4 - Gear Down
3 - Airbrake down
4 - Airbrake up
M - Lights
N - Nose gear light
Step 3: Taxiing to the Runway
I know it's kinda hard but just put the throttles maybe in 1/8 or something. Use also the rudder when entering the runway. I suggest to do this first on an Antonov 12.
Step 4: Prepare for Takeoff
Put down flaps. Put throttles in full with afterburners. Remove afterburners when the altitude indicator(which tells the flight level) is in 50-75(could be 5000-7500)You can remove it by pressing once the Page Down.
Step 5: Taking Off
You can either take off with pressing down button or without. Once the altimeter is on 6-10, put flaps a little up and retract landing gear if you want. Once at 50-75, remove afterburners. To cruise, just lower your throttles to 3/8.
Step 6: Cruising
Cruise without flaps and throttles on 3/8. If it stalls, press flap down once and put throttles to half. You will really make it ascend slightly but it's okay because I think Rigs of Rods don't have autopilot.
Step 7: Approach
Start an approach by putting throttles to idle or 1/8 thrust. Line up at the runway but I just landed anywhere because it's hard to locate an airport in Rigs of Rods.Press flaps half. Press airbrakes twice or once. Put landing gear on and make sure it is on brakes.
Step 8: Landing
When landing, make sure that you put full flaps at final approach and full airbrake and wheelbrake at touchdown because most jets has no thrust reverser.
Be the First to Share
Recommendations
Rigs Of Rods Tow Trucks Controls
Arduino Contest
Box Challenge
Explore Science Challenge
Introduction¶
Rigs of Rods (RoR) is a free/libre soft-body physics simulator mainly targeted at simulating vehicle physics. The soft-body physics system is based on mass-spring-damper theory.
This page will help you learn the basics of Rigs of Rods, from your first run to playing multiplayer.
First Run¶
When launching RoR for the first time, the user directory will be created. On Windows this is located at DocumentsMy GamesRigs of Rods or at ~/.rigsofrods on Linux. This is where configuration files, logs, and mods are stored.
The game should open in a small window:
Before playing, you should first change your settings. Begin by clicking Settings.
First, make sure the rendering system is set to Direct3D9 Rendering Subsystem. If it's set to OpenGL Rendering Subsystem, change it then restart RoR. If Direct3D9 doesn't appear on the list, install the DirectX Runtime and restart your PC.
If you're running Linux, ignore this as DirectX is not available.
Now select Video Mode and change it to your monitor's native resolution then restart the game to apply your changes.
Click Settings again, then click the Graphics tab.
The following settings should be fine for most people, but feel free to adjust them to fit your liking.
Then click the Audio tab and set the device and volume.
Once you're finished, restart the game again.
Now you're ready to begin playing. Start by clicking Single player to open the terrain selector.
For the sake of this tutorial, select North St Helens.
Once the terrain loads, you will spawn as a country person known lovingly as RoRBot. You control him with the arrow keys while using SHIFT to run and SPACE to jump (good for getting over bumps, or if you get stuck).
You spawn in front of a building known as the Rig-a-Deal. This is where you will spawn new trucks. Walk into the 'Office' to bring up the selection menu. You can also spawn a vehicle anywhere at any time by pressing CTRL+G.
Use the mouse or arrow keys to move through the menus. Select the DAF Semi truck. The truck spawns inside the Rig-a-Deal with you inside it. If you happen to spawn the truck with RoRBot outside of the vehicle, simply hit ENTER/RETURN to get in a vehicle.
Driving¶
The DAF semi isn't the most agile or best looking truck in the game, but it serves us a purpose later. The camera inside the Rig-a-Deal is fixed, so you will be unable to move it until you leave. Switch to the in-cab camera by hitting C. Use the UP arrow key to accelerate out of the Rig-a-Deal (Rigs of Rods uses a simulated clutch which begins to engages at a specific point. This why the semi doesn't move until 1000 RPM). Use DOWN to brake, and LEFT/RIGHT arrows to steer. Use PGUP/PGDOWN to select your transmission direction/speed.
Start by exploring Coldwater, the town you begin in. It isn't very big but provides some decent moving room. If you get stuck, or wreck, hit I to reset back to the Rig-a-Deal, or BACKSPACE to reset the truck in its current position.
If you hold BACKSPACE for one second, you will enable the 'advanced repair mode' which lets you move the vehicle to any position by using the WASD keys to move and the arrow keys to rotate. Press BACKSPACE again to exit.
You can switch transmission modes by hitting Q. There are 5 transmission modes available: * Automatic shift * The gear change is fully automatic, the player only has to set the gear by pressing PGUP/PGDOWN. * Manual shift: Auto clutch * The gear is changed on user request. No clutch should be pressed to change gear, vehicle takes care of that. Just use A and Z to shift. * Fully manual: sequential shift * The user must press clutch and select whether it is needed to switch up or down. Depress the clutch by hitting LEFT SHIFT, then press A to upshift or Z to downshift. * Fully manual: stick shift * This mode is useful if you have a game controller with an H-shifter (like Logitech G27). In this mode the player can set gears 1-6, N, and R directly by the stick. * Fully manual: stick shift with ranges * This mode is mostly used in vehicles having more gears than 6. In this case you can select from 3 ranges: low (gear 1-6), medium (gear 7-12), high (gear 13-18) by pressing the appropriate button. Like if you want to select the 8th gear, you have to select gear N first, press the midrange button, then select the 2nd gear on the h-stick. Remember, range selection can be made only if the gear is in N.
If you stall, there are 2 keys to be remembered: X enables or disables the electricity in the vehicle, and S activates the starter. Press X and you'll see a yellow battery icon lit on the UI. Hold S until the engine is started. Resetting the vehicle with BACKSPACE or I will instantly start the engine.
Remember how to change the camera? Hit C twice. You're now in third-person view and can move the camera around. Use the number pad (specifically 2, 4, 6, and 8) to move the camera. Pressing 5 resets the camera. 9 and 3 zoom in/out respectively and 1 gives you a front view of your truck.
You can also move the camera by holding right-click and dragging with your mouse.
Now, make your way back to the Rig-a-Deal.
Trailer Loads¶
You should see a large, grey, open-platform with an orange console. Park the truck (use P to set the parking brake) and hit ENTER/RETURN to get out. Note that the same camera commands work with RoRBot. Step in front of the orange console to open the load selector.
Select the Semi trailer (37 tons).
Get back in the semi and drive in front of the load. Use the camera in third-person view to help you if you need. Back into the trailer. When you get close, use F1/F2 to lower and raise the trailer legs respectively.
The hook points must be within 10cm to hook, so it may take some practice to get close. When you think you're close, hit L. If you're close enough, the semi will latch to the trailer. Raise the legs by holding F1.
You can now drive around with the trailer. You will notice that the trailer has a large effect on how the semi pulls and handles! This process is the same for most trailers. In some cases you can secure loads to trucks using O.
NOTE: on some computers trailers may increase lag or decrease FPS(frames per second) dramatically!
Flying¶
Now that we've become comfortable with driving. Let's try to fly. Move your mouse to the to top of the screen to bring up the menubar, click Vehicles then Antonov 12 to instantly enter the plane which is sitting on the runway.
Apply the parking brake by pressing P. Turn on the flying lights by pressing M. Start the engines by using your mouse to click the ON buttons in the lower right hand corner (or by pressing CTRL+HOME).
When the engines settle to the appropriate idle speed (somewhere near 750rpm), release the parking brake and throttle the engines to full by holding PGUP. Pressing CTRL+PGUP will instantly set the throttle to max.
If you have a short runway, be sure to use the flaps with 1 and 2 (this is especially helpful in multiplayer). When you reach 75-80 knots, lift up by pressing the DOWN arrow. Steer with the LEFT/RIGHT arrows and control the rudder with Z and X. Raise the landing gear, in this plane, by holding F3.
The An-12 does not stand high speeds (175+ knots) well, and you may find that if you go too fast the wings will break apart!
When it comes to landing, make sure you have room to slow down and take your time. Going straight into the runway is the easiest way to land when you first start off. It may take a few passes to go head-on so don't be afraid to abort a landing and throttle back up to regain altitude. The entire process is easier if you shadows enabled, but is possible without. When you land, hit R to reverse thrust and throttle up to slow down in addition to using B to brake the wheels.
This tutorial does not make use of the autopilot. For more information regarding the use of autopilot, see Aircraft handling.
Boating¶
We must explore beyond Coldwater to get to the marina. Take the main road out of Coldwater, heading southwest toward the Elk Hotel. Take the second left after you leave town. You should see the water soon. When you arrive at the marina, you should see marina-style boat docks and a ramp along with a building.
Walk around to the front of the building and enter the open door. Choose the Wahoo boat.
Use UP/DOWN to throttle and LEFT/RIGHT to steer. Use PGUP to center the throttle (to neutral) and PGDOWN to center the rudder. It may take you a while to get your sea legs. If you have waves enabled, see how far out you can go before you flip over waves!
Conclusion¶
Now that you have a basic grasp of the basic vehicles in RoR, it is now up to you to create your own scenarios. If you feel bored, try the vast selection of mods available on the Repository.
Multiplayer¶
If you feel like sharing the experience, you can play on one of the many public multiplayer servers. To get started, click the Multi player button on the main menu.
Set your username by clicking on Settings and changing it in the Player nickname textbox.
You may have to restart the game for the changes to take effect.
Rigs Of Rods Keyboard Controls
Now just select the server you want to play on, then click Join.
The 'any' servers allow you to select a terrain, while other servers (such as Official Nhelens) are set to use a specific terrain.
While on a server, you can enable collisions between other players or hide nicknames by going to Settings in the top menubar.
Rigs Of Rods Controls
Note that multiplayer is still in development and can be unstable at times!
Rigs Of Rods Bus Controls
Default controls¶
Please see the Controls and configuration page for a full list of controls.
Adding content¶
Rigs Of Rods Control List
To add new vehicles and terrains, go to the Installing content page.